Skip to main content

Aperture (0x5007)

Get/Set the aperture value. Datatype: UINT16 Access: GetSet Codec Type: Custom Codec

ShutterSpeed (0xd20d)

Get/Set the shutter speed. Datatype: UINT32 Access: GetSet Codec Type: Custom Codec

Iso (0xd21e)

Get/Set the ISO sensitivity. Datatype: UINT32 Access: GetSet Codec Type: Custom Codec

Exposure (0x0)

Exposure (either metered or manually set) Datatype: INT16 Access: Get Codec Type: Base Codec

MeteredExposure (0xd1b5)

AKA Metered Manual Level - Get the metered manual level. Datatype: INT16 Access: GetSet Codec Type: Custom Codec

ExposureCompensation (0x5010)

AKA Exposure Bias Compensation - Get/Set the exposure bias compensation. Datatype: INT16 Access: GetSet Codec Type: Custom Codec

StillCaptureMode (0x5013)

Get/Set the drive mode. Datatype: UINT32 Access: GetSet Codec Type: Enum Codec

Valid Values


OsdImageMode (0xd207)

Get/Set the OSD image mode Datatype: UINT8 Access: GetSet Codec Type: Enum Codec

Valid Values


LiveViewStatus (0xd221)

Get the live view status. Datatype: UINT8 Access: Get Codec Type: Enum Codec

Valid Values


StillImageSaveDestination (0xd222)

Get the information of still image save destination. Datatype: UINT8 Access: GetSet Codec Type: Enum Codec

Valid Values


PositionKeySetting (0xd25a)

Get/Set the position key setting (controls which setting takes priority between host and camera) Datatype: UINT8 Access: GetSet Codec Type: Enum Codec

Valid Values


SetLiveViewEnable (0xd313)

Set live view enable. When using Live View while connected in “Remote Control with Transfer Mode,” it is necessary to enable the feature using this Control Code. Datatype: UINT16 Access: GetSet Codec Type: Enum Codec

Valid Values


SetPostViewEnable (0xd312)

Set post view enable. When using Live View while connected in “Remote Control with Transfer Mode,” it is necessary to enable the feature using this Control Code. Datatype: UINT16 Access: GetSet Codec Type: Enum Codec

Valid Values


ShootingFileInfo (0xd215)

Get the shooting file info. 0x0000 indicates no files are available, 0x0001 - 0x7FFF indicate files exist. 0x8001 and over indicate the files are ready for transfer. Datatype: UINT16 Access: Get Codec Type: Base Codec

ShutterHalfReleaseButton (0xd2c1)

Control shutter half-release (S1) (focus) button. Datatype: UINT16 Access: GetSet Codec Type: Enum Codec

Valid Values


ShutterReleaseButton (0xd2c2)

Control shutter release (S2) button. Datatype: UINT16 Access: GetSet Codec Type: Enum Codec

Valid Values


S1S2Button (0xd2e6)

Execute shutter half-release (S1) and shutter release (S2) buttons. Datatype: UINT16 Access: GetSet Codec Type: Enum Codec

Valid Values


MovieRecButton (0xd2c8)

Control movie record button (hold) Datatype: UINT16 Access: GetSet Codec Type: Enum Codec

Valid Values


LiveViewImageQuality (0xd26a)

Get/Set the live view image quality. Datatype: UINT8 Access: GetSet Codec Type: Enum Codec

Valid Values


ContentTransferEnable (0xd295)

Get the contents transfer enabled status. Datatype: UINT8 Access: Get Codec Type: Enum Codec

Valid Values


FocusIndication (0xd213)

Get the focus indication. Datatype: UINT8 Access: Get